![]() If you do both of these things and are still getting PL1 throttling at 45W then there is not much you can do about this. In the TPL window, set the long and short turbo power limits much higher. If you want less throttling and more performance and if you are going to use ThrottleStop, check the FIVR - Disable and Lock Turbo Power Limits option. Some laptops are firmly locked down to 45W long term and there is not much you can do about it. Some laptop manufacturers leave these power limits unlocked so you can increase these limits and significantly improve performance. The 9750H has a 45W TDP rating so your CPU is running exactly as Intel intended. Now the CPU is throttled so power consumption does not exceed 45W. Long term, if you continue stress testing, this will change to PL1 throttling. This type of throttling will show up as PL2 - CORE combined with EDP OTHER - RING in ThrottleStop. During stress testing, if the power limit tries to exceed 56W, the CPU will be forced to throttle so it does not exceed this power limit. These are the default settings for the 9750H. Your ThrottleStop screenshots show that the long term turbo power limit (PL1) is set to 45W and the short term turbo power limit (PL2) is set to 56W. Two different programs writing different data to the same CPU register is never a good thing to do. It is best to run Intel Extreme Tuning Utility or ThrottleStop but do not run both at the same time.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |